Description
PHOTO SENSOR ( Photo Interrupter )
Model : PI-06
* Photo interrupter or the photo sensor for DT-2240D, PDT-2250, TR-RPM1A4.
* Power supply : DC 12 V to 30V.
* 3 wires : Power, Signal and Ground.
₹4,370.00 (18% GST Extra)
Shipping charges are applicable
PHOTO SENSOR ( Photo Interrupter )
Model : PI-06
* Photo interrupter or the photo sensor for DT-2240D, PDT-2250, TR-RPM1A4.
* Power supply : DC 12 V to 30V.
* 3 wires : Power, Signal and Ground.
PHOTO SENSOR ( Photo Interrupter )
Model : PI-06
* Photo interrupter or the photo sensor for DT-2240D, PDT-2250, TR-RPM1A4.
* Power supply : DC 12 V to 30V.
* 3 wires : Power, Signal and Ground.
4-20 mA Controller/Alarm/Indicator
Model : CT-2012
* Input : 4-20 mA DC, linear.
* User can default the desired display value between -1999 to 9999 ( decimal point can be selected to DP1, DP2, DP3 ) and all the preset data will be saved into the memory circuit permanently.
* When CT-2012 cooperates with LUTRON’S 4 TO 20 mA transmitters, whole system will become the high performance Controller/Alarm/Indicator for following measuring functions : Humidity, Light, pH, Dissolved Oxygen, Conductivity, Vibration, Pressure, Sound, Temperature, RPM, Hz, Load cell ( Weight, Force ), Potential ( Angle, Level ). ACV, ACA, DCV, DCA, WATT….
* Control output : 2 points ( COM, NO ).
* Alarm output : 2 points ( COM, NO ).
VOLT METER MODULE
Model : DP-40(LED)
Range : +199.9 mV,3 1/2 digit
DP-40 : 13mm red LED,DC 5V Power
Size: 71*46 mm,Depth: 21 mm
AC Voltage CONTROLLER/MONITOR
Model : PAV-6068
* Measurement range ( no cooperate with the external PT ) : ACA : 0 to 600 ACV, 40 to 400 Hz.
* True rms for ACA measurement.
* Voltage input can cooperate with the external PT ( voltage transformer ) to expend the measurement range. the PT range can be adjusted with setting.
* Control setting, Hi/Lo alarm setting.
* Control realy output, alarm relay output.
RS-232 CONTROLLER/ MONITOR
Model : PRS-2321
* Cooperate the LUTRON instruments ( build in the RS232 interface ), the panel meter will show all the measuring value.
* U 1 control setting, U2 control setting.
* U1 control relay output, U2 control realy output.
* U1, U2, U3 display.
* Power : 90 ACV to 264 ACV, 50/60 Hz.
