PRESSURE METER
Model : PS-9302
FEATURES
* Meter can cooperate with 2, 5, 10, 20, 50, 100, 400 bar * Zero button on the front panel, easy adjust the zero value of
sensor, new calibration are not necessary when change the pressure sensor.
new sensor . * Push button gain adjustment, usage for calibration precisely
* When change the new pressure sensor, just select pressure if necessary.
type ( 2, 5, 10, 20, 50, 100, 400 bar ) on the front panel button. * Separate pressure sensor, easy operation. & remote
The sensor type will memorize into the circuit permanently by measurement.
EEPROM. *Microprocessor circuit assures maximum possible accuracy,
* 8 kind pressure units ( bar, psi, Kg/cm2 mm/Hg, inch/Hg, provides special functions and features,
meter/H20, inch/H20, Atmosphere ) select by push button on * Super large LCD display with contrast adjustment for best
the front panel viewing angle.
* Optional full line presssure sensor ( 2, 5, 10, 20, 50, 100, * Records maximum & minimum readings with recall.
400 bar ) are available. * Data Hold function for stored the desired value on display.
* Auto shut off saves battery life. * Built-in low battery indicator.
* 4 pin DIN socket, 2 pins to provide DC 5 V exciting voltage * RS232/USB PC serial interface, can match the personal
( power supply ) to pressure transducer, another two pins for computer used as the Data Logger, Pressure Recorder.... and
accept transducer signal of 100mV full scale. other mordern pressure measuring system.
GENERAL SPECIFICATIONS
Circuit Microprocessor LSI circuit. Data output RS 232/USB PC serial interface.
Display 61 mm x 34 mm supper large LCD display. Sampling time Approx. 0.8 second.
15 mm ( 0.6" ) digit size. Power off Auto shut off, saves battery life, or manual
Display units bar, psi, Kg/cm^2, mm/Hg, inch Hg, meter H20 off by push button.
inch H20, Atmosphere. Operating 0 to 50 ℃ ( 32 to 122 ℉ ).
Accuracy ± ( 0.5% + 1 d ) temperature
* Under the signal from the sensor is at full Operating Less than 80% R.H.
scale ( 100 mV ). humidity
* Meter only. Power supply 006P DC 9V battery(heavy duty).
* Within 23 ℃± 5 ℃ Power current Approx. DC 8.5 mA.
Pressure Optional, exciting voltage DC 5V, Weight 345 g/0.76 LB
transducer Sensor max. range output is DC 100 mV. Dimension 180 x 72 x 32 mm ( 7.1 x 2.8 x 1.3 inch ).
Zero adjust Push button on the front panel. Accessories * Instruction manual.........................1 PC
Span adjust Push button gain adjustment, usage for included
calibration precisely if necessary. Optional * Pressure sensor, PS100-xxBAR
Transducer Approx 100 mV (Full Scale). accessories refer to the bottom description.
mV input signal * Hard carrying case ( CA-06 ).
Exciting output DC 5 V. * Data acquisition software, SW-U801-WIN.
power supply * RS232 cable, UPCB-01
Data hold By push button. * USB cable, USB-01
Data record Record maximun & mininum readings.
APPLICATIONS
* Measure Pneumatic Pressures. * Hydraulic Servo controls * Refrigeration
* Measure Automobile Engine Vacuum Pressures. * Air conditioning
* Pressure for Super Heat Measurements * Food Processing
ELECTRICAL SPECIFICATIONS
Sensor type 2 bar 5 bar 10 bar 20 bar 50 bar 100 bar 400 bar
Max. Reso- Max. Reso- Max. Reso- Max. Reso- Max. Reso- Max. Reso- Max. Resorange
lution range lution range lution range lution range lution range lution range lution
bar 2 0.002 5 0.005 10 0.01 20 0.02 50 0.05 100 0.1 400 0.5
psi 29 0.02 72.5 0.1 145 0.2 290 0.2 725 1 1450 2 5800 5
Kg/cm^2 2.040 0.002 5.095 0.005 10.19 0.01 20.40 0.02 50.95 0.05 101.9 0.1 408 0.5
mm Hg 1500 2 3750 5 7500 10 15000 20 37500 50 75000 100 300000 500
inch Hg 59.05 0.05 147.6 0.1 295.2 0.2 590.5 0.5 1476 1 2952 2 11810 10
meter H20 20.40 0.02 50.95 0.05 101.9 0.1 204.0 0.2 509.5 0.5 1019 1 4075 5
inch H20 802 1 2006 2 4010 5 8020 10 20050 20 40100 50 160600 200
Atmosphere 1.974 0.002 4.935 0.005 9.87 0.01 19.74 0.02 49.35 0.05 98.7 0.1 394.5 0.5
PRESSURE SENSOR, Model : PS100-XXBAR
Description * Optional, pressure sensor that cooperate with PS-9302.
* Out put : 100 mV DC for full scale.
* 4 pin DIN plug, 2 pins to accept DC 5 V exciting voltage(power supply) for pressure transducer, another two pins
for output signal of 100mV full scale.
Size : 30 mm dia. x 85 mm. Weight : 160 g.
Pressure Port Connector : PS 1/4" ( 19 teeth per inch ) or 1/4" NPT
* Included one adapter connector that convert the 1/4" NPT to 1/4 " PS.
Model 2 bar sensor PS100-2BAR
5 bar sensor PS100-5BAR
10 bar sensor PS100-10BAR
20 bar sensor PS100-20BAR
50 bar sensor PS100-50BAR
100 bar sensor PS100-100BAR
400 bar sensor PS100-400BAR
