SD Card real time data recorder 3 PHASE POWER ANALYZER, with harmonic measurement
Model : DW-6095
* Analysis for 3 phase multi-power system, 1P/2W, 1P/3W, 3P/3W, 3P/4W.
* 3 current probes ( CP-1201 ) are included, if change the current probes, the calibration procedures are not necessary.
* Current probe input signal/ranges with selection :
Input signal ( ACA ) : 200 mV/300 mV/500 mV/1 V/2 V/3 V.
Ranges ( ACA ) : 20 A/200 A/2000 A/30 A/300 A/3000 A.
* Meter can cooperate the universal current probes.
* Complete set with 4 PCs Test Leads, 4 PCs Alligator clips, 3 PCs Clamp Probe ( CP-1201 ), AC to DC 9V adapter, 2 G SD memory card and Carrying bag.
* Measurement :
V (phase-to-phase), V (phase-to-ground)
A ( phase-to-ground)
KW / KVA / KVAR / PF ( phase)
KW / KVA / KVAR / PF (system)
KWH / KVAH / KVARH / PFH (system)
Phase angle
* Harmonics display (1-50th order).
* Simultaneous display of Harmonics and Wave form.
* Display of Wave form Peak Values.
* Analysis of Total Harmonic Distortion ( THD ).
* Graphic Phase diagram with 3-Phase system parameters.
* 3 phase Voltage or Current Unbalanced Ratio ( VUR, AUR ) and Unbalanced Factor.
* Calculated Unbalanced Current through Neutral Line ( An ).
* Capture Transient events (including Dip, Swell and Outage ) with programmable threshold ( % ).
* Programmable CT ratio ( 1 to 600 ) and PT ratio ( 1 to 1000 ).
* ACV input impedance is 10 Mega ohms.
* Safety Standard : IEC 1010, CAT III 600V.
* Built-in clock and Calender, real time data record with SD memory card , sampling time can be set from 2 to 7200 seconds. Just solt the SD card into the computer, all the measured values with the time information ( year, month, data, hour, minute, second ) can be downloaded to the Excel directly, then user can make the further data analysis by themselves.
* Powered by AA ( UM-3 ) DC 1.5 V X 8 batteries ( Alkaline type ) or DC 9V adapter.
* Computer data output, can cooperate with optional USB Cable/USB-01, RS232 cable/UPCB-02 and Data Acquisition software, SW-811, SW-E802.
* Optional current probes : CP-1201, CP-200, CP-2000, CP-3000, detailed specification, refer to page 31-32.
* User can order the meter only ( without the current probes ) with the special request if intend to cooperate their own current probes.
* Patented.
