POWER FACTOR CONTROLLER/MONITOR
Model : PPF-6066
FEATURES
* Professional power factor meter with standard DIN case Setting 1st layer CtLo ( Control low limit)
( 96 x 48 mm ) and Control/Alarm function. Function setting CtHi ( Control high limit )
* Microprocessor circuit ensures high accuracy and procedures ALLo ( Alarm low limit )
provide special functions and features. ALHi ( Alarm high limit )
* Large red LED display, high brightness and easy to read. Second layer CtSt ( CT rate setting )
* Measurement range ( no cooperate the external CT and setting PtSt ( PT rate setting )
the PT ) : procedures CtHy ( Control hysteresis value
Power factor : 0.10 to 1.00 PF. setting )
* Input signal ( without PT, CT ) : ALHy ( Alarm hysteresis value
ACV : 0 to 600 ACV, 40 to 400 Hz. setting )
ACA : 0 to 10 A, 40 to 400 Hz. Over input " - - - - " mark indication.
* Current input can cooperate the external CT ( current Zero Automatic adjustment.
transformer ) such as CT 1000/5A, CT 100/5A ...to Adjustment
expend the measurement range. The CT range can be Data Output RS232 / USB PC Computer interface.
adjusted with default. * Connect the optional RS232 cable ,
* Voltage input can cooperate the external PT ( voltage UPCB - 02 will get the RS232 plug.
transformer ) to expend the measurement range. The * Connect the optional USB cable,
PT range can be adjusted with default. USB - 01 will get the USB plug.
* Control setting, Hi/Lo alarm setting. Operating perating 0 to 50 ℃.
* Control relay output, alarm relay output. Temperature
* Control Relay will make action when the reading value Operating Less than 80% R.H.
reach to control value. Humidity
* Alarm Relay will make action when the reading value Power Supply 90 to 260 ACV, 50/60 Hz.
reach to high/low alarm value. Power Approx. 3.3 VA/AC 110V.
* Hysteresis value setting for control and alarm function. Consumption Approx. 4.9 VA/AC 220V.
* Power : 90 ACV to 264 ACV, 50/60 Hz. * Under no load
* RS232/USB computer interface. Weight 261 g/ 0.57 LB.
* Option data acquisition software. Dimension DIN size : 96 x 48 mm.
Panel cut size : 92 x 46 mm.
GENERAL SPECIFICATIONS Depth : 110 mm.
Display Large LED display. 4 digit LED . Accessories Instruction manual....................... 1 PC
14 mm ( 0.55 inch ) digit height . Included Case holder with screw.................2 PCs
5 indicators . Optional USB cable , USB - 01
PV ( process value ) indicator Accessories RS232 cable , UPCB - 02
SV ( set value ) indicator Data Acquisition software SW-U801-WIN
Control out indicator * Real time SD card datalogger
Alarm out indicator DL-9602SD
PF indicator * GSM controller, GSM-889.
Circuit Custom chip of microprocessor LSI * Interface cable ( cable between meter
circuit. to GSM-889 ), GMCB-89.
Power factor 0.10 to 1.00 PF.
measurement ELECTRICAL SPECIFICATIONS
Range 0.10 to 1.00
Input signal ACV : 0 to 600 ACV, 40 to 400 Hz. Resolution 0.01
ACA : 0 to 10 A, 40 to 400 Hz. Accuracy ± ( 1.5 % + 2d ) reading
* w/o PT. CT.
Sampling Time Approx. 0.8 second. Remark :
Relay Output Number 2 relays * Measuring Signal come from the rear terminals .
Function Relay 1 : * T11, T15 ACV input : 10 ACV to 600 ACV .
Control relay. PT ( Potential transformer ) adjust value : x 1 to x 100.
Relay 2 : * T16, T15 ACA input : 0.05 ACA to 10 ACA.
High/Low alarm relay. CT ( current transformer ) adjust value : x 1 to x 200.
Max load 0.5 ACA/250 ACV * PF accuracy is test under input signal is sine wave, 50/60 Hz.
0.5 DCA/24 DCV * ACV frequency response is from 40 to 400 Hz
* Do not apply the relay * Accuracy value is specified within 23℃ ± 5℃
contact load current * The above spec. accuracy are tested under the environment RF
> 0.5 A, other wise the Field Strength less than 3 V/M & frequency less than the 30 MHz
relay may be damaged only.
permanently without
warranty.
