LIGHT ADAPTER
Model : LX-02
APPLICATIONS
To cooperate with DMM be used as a precision Light ( LUX meter ) or to connect with
analyzer, recorder, tape recorder, controller... .
SPECIFICATIONS
Range 3 ranges : Range 1, Range 2, Range 3
Range 1 - 0 to 2,000 Lux.
Range 2 - 2,000 to 20,000 Lux.
Range 3 - 20,000 to 50,000 Lux.
Output Range 1 - 0.1 mV per Lux.
Range 2 - 0.1 mV per 10 Lux.
Range 3 - 0.1 mV per 100 Lux.
Accuracy ± ( 5% + 0.2 mV ).
Sensor Exclusive photo diode & correction filter, spectrum meet C.I.E.
Sensor COS correction factor meet standard.
Power Supply DC 9V battery, 006P, MN1604(PP3) or equivalent.
Power Consumption Approx. DC 6 mA.
Power Failure Build in low battery indicator.
Operating Temp. 0 to 50℃ ( 32 to 122℉ ).
Operating Humidity Less than 80% R.H.
Dimension Main instrument :
100 x 50 x 25 mm ( 3.9 x 1.9 x 1.0 inch ).
Sensor probe:
82 x 55 x 7 mm ( 3.2 x 2.2 x 0.3 inch ).
Weight 150 g/0.33 LB (including battery).
Standard Accessory Light Sensor....................................................... 1 PC.
Instruction Manual ............................................. 1 PC.
OPERATION PROCEDURES
* Connect the plugs to the volts ( Hi ) & com ( Lo ) input terminals of external
Voltmeter or Multimeter.
* Multimeter : Select the desired range of DC volt 200 mV range.
Note :
a. Do not use auto range MULTIMETER.
b. The input impedance of external MULTIMETER (voltmeter) should be
10 Meg ohm at least.
