POWER CLAMP METER
Model : PC-6010
FEATURES
*Watt ( true power ), ACV, DCV, ACA, OHMS, Diode.
*Watt measurement via the inductive clamp jaw.
*Wide range for power measurement, max. value up to 100 KW.
* Design meet IEC 1010 safety requirement.
* Heavy duty ACA clamp meter, 600 A max. range.
* Compact & heavy duty ABS housing plastic case.
*Measure AC current by the inductive conductor.
* LSI circuit provides high reliability and durability.
* LCD display, clear readout
*Overload protection circuit is provided for all range.
GENERAL SPECIFICATIONS
Display 13 mm (0.5") LCD, 3 1/2 digits.
Max. indication 1999.
Measurement Watt (true power).
DCV, ACV, ACA, ohms, Diode.
Polarity Automatic Switching, " - " indicates
negative polarity.
Current Sensor Hall effect sensors.
Over-input Display shows " 1 " or " -1 ".
Watt Zero Built-in external adjustment knob.
Adjustment
Sampling Time Approx. 0.4 second.
Battery Heavy duty type or Alkaline battery.
DC 9V battery. 006P, MN1604 ( PP3 )
or equivalent.
Operating Temp. 0 to 50 ℃ ( 32 to 122 ℉ ).
Operating Less than 80% RH.
Humidity
Power Approx. DC 15 mA.
Consumption
Weight 480 g/0.88 LB (including battery).
Dimension HWD 230 x 74 x 38 mm.
(9.1 x 2.9 x 1.5 inch)
Conductor Size 73.5 mm ( 2.9 inch ) - out side.
Standard Operation manual.............. 1 PC.
Accessories Test lead (red & black)...... 1 pair.
Carrying Case Model : CA-05A
( Optional )
ELECTRICAL SPECIFICATIONS ( 23 ± 5 ℃ )
Function Range Resolution Accuracy Overload
Protection
AC Watt 20 KW 0.01 KW ± ( 3% + 8d ) Volt input :
(true power) AC 600V
* ref. remark 100 KW 0.1 KW ± ( 3% + 5d ) Current input :
AC 500A
DC voltage 200 V 0.1 V ± (0.8 % + 1 d ) DC 600 V.
AC voltage 600 V 1 V ± (1% + 2 d) AC 600 V.
OHMS 2 k ohm 1 ohm ± (1 % + 1 d) AC/DC 250 V
AC current 200 A 0.1 A ± (2% + 10 d) 1000 ACA
600 A 1 A ± (2% + 5 d) (within 1 min.)
Diode Short/non conductance, good/defect test
Continuity A continuity testing beeper is equipped, so when checking circuits of shorts or
Beeper opens, then it is not necessary to look at the meter. The Beeper sounds will be
generated if continuity is present.
