AC Current CONTROLLER/MONITOR
Model : PAA-6069
FEATURES
* Professional ACA meter with standard DIN case ( 96 x Over input " - - - - " mark indication.
48 mm ) and Control/Alarm function. Zero Automatic adjustment.
* Microprocessor circuit ensures high accuracy and Adjustment
provide special functions and features. Data Output RS232 / USB PC Computer interface.
* Large red LED display, high brightness and easy to read. * Connect the optional RS232 cable ,
* Input signal ( without CT ) : UPCB - 02 will get the RS232 plug.
ACA : 0.05 to 10.00 ACA, 40 to 400 Hz. * Connect the optional USB cable,
* True rms for ACA measurement. USB - 01 will get the USB plug.
* ACA input can cooperate the external CT ( Current Operating 0 to 50 ℃.
transformer ) to expend the measurement range. The Temperature
CT range can be adjusted with default. Operating Less than 80% R.H.
* Control setting, Hi/Lo alarm setting. Humidity
* Control relay output, alarm relay output. Power Supply 90 to 260 ACV, 50/60 Hz.
* Control Relay will make action when the reading value Power Approx. 3.3 VA/AC 110V.
reach to control value. Consumption Approx. 4.9 VA/AC 220V.
* Alarm Relay will make action when the reading value * Under no load
reach to high/low alarm value. Weight 261 g/ 0.57 LB.
* Hysteresis value setting for control and alarm function. Dimension DIN size : 96 x 48 mm.
* Power : 90 ACV to 264 ACV, 50/60 Hz. Panel cut size : 92 x 46 mm.
* RS232/USB computer interface. Depth : 110 mm.
* Option data acquisition software. Accessories Instruction manual....................... 1 PC
Included Case holder with screw.................2 PCs
GENERAL SPECIFICATIONS Optional USB cable , USB - 01
Display Large LED display. 4 digit LED . Accessories RS232 cable , UPCB - 02
14 mm ( 0.55 inch ) digit height . Data Acquisition software SW-U801-WIN
5 indicators . * Real time SD card datalogger
PV ( process value ) indicator DL-9602SD
SV ( set value ) indicator * GSM controller, GSM-889.
Control out indicator * Interface cable ( cable between meter
Alarm out indicator to GSM-889 ), GMCB-89.
A ( ACA ) indicator
Circuit Custom chip of microprocessor LSI ELECTRICAL SPECIFICATIONS
circuit.
ACA 0.05 ACA to 10.00 ACA. Direct input ( without CT )
measurement * True rms value
Sampling Time Approx. 0.8 second. Range 0.05 ACA to 10.00 ACA
Relay Output Number 2 relays Resolution 0.01 ACA
Function Relay 1 : Accuracy ± ( 0.5 % + 5d ) reading
Control relay. Remark :
Relay 2 : * T16, T15 ACA input : 0.05 ACA to 10.00 ACA.
High/Low alarm relay. * Accuracy is test under input signal is sine wave, 50/60 Hz.
Max load 0.5 ACA/250 ACV * ACA frequency response is from 40 to 400 Hz.
0.5 DCA/24 DCV * ACA measurement is True RMS value.
* Do not apply the relay * Accuracy value is specified within 23℃ ± 5℃
contact load current
> 0.5 A, other wise the With CT ( Current transformer )
relay may be damaged
permanently without Range 1 ACA to 2000 ACA
warranty. Resolution 1 ACA
Setting 1st layer CtLo ( Control low limit ) Accuracy ± ( 0.5 % + 5d ) reading
Function setting CtHi ( Control high limit ) Remark :
procedures ALLo ( Alarm low limit ) * Measuring Signal come from the rear terminals .
ALHi ( Alarm high limit ) * T16, T15 ACA input : 0.05 ACA to 10.00 ACA.
Second layer CtSt ( CT rate setting ) CT ( Current transformer ) adjust value : x 1 to x 200.
setting CtHy ( Control hysteresis value * Accuracy is test under input signal is sine wave, 50/60 Hz.
procedures setting ) * Accuracy is specified for the meter only, not include the accuracy
ALHy ( Alarm hysteresis value setting) of CT ( Current transformer ).
